StatiCAD is a software that performs static analysis and project drawings of masonry-buildings according to earthquake regulations. There are 3 version types. The program has been translated into 104 languages.


*NEW*  StatiCAD Ultimate StatiCAD V6 Professional StatiCAD V6 Standard

Buy Annual Subscription   Buy Now  Buy Now  
Upgrade   Upgrade  Upgrade 

                                    Click to compare products.           


Quick and easy data access
Drawn building on the screen can be viewed in three dimensions simultaneously with the graphical interface. The program is quite practical for use. For example , walls and bond beams are drawn at the same time and when the doors/windows created in the wall program automatically divides the wall into two parts, it automatically creates the horizontal bond beams on the doors and Windows; creates a piece of wall on the doors/windows and a piece of wall at the bottom of the wall. It can select and arrange multiple components. Modelling process of a building can be completed in 2-3 hours. Reports and drawings can be taken in a single analysis. StatiCAD has graphical interface for modelling building.




Complete and Advanced Structural Analysis

Program has many structural analysis options.

Program can, solve building system, make design calculations, generate reports, drawings with one click.

Program can use Eurocode8 or TBDY for determining earhquake forces with , modal analysis or equivalent earthquake load analysis.

Program can use finite elements method or classical methods for load distributions.

It can assigned masonry, reinforced concrete, steel, timber, conrete materials to elements.

Program can make strengthening of existing building with shotcrete-steel wire mesh or fibrous polymer wrap.

Program can make rebar calculations of beams and get drawings and calculation reports after analysis.

There is only axis dependence between ground floor and foundation. There is no other axis dependence between storeys. So nodes don’t need to be one over the other for load transfer and static calculations. That provides program with great flexibility and enables it to model any type of masonry structures. The program uses analytical models or finite element method optionally. You can expect exact match between manual calculation and program at classic analysis. And very closer results to SAP2000 in finite element analysis. All calculations are made automatically in the program with one click. StatiCAD can perform the above operations without the need for an additional program, it also has additional features such as SAP2000 automation with shell elements, finite element analysis and response spectrum analysis.

If desired, the project is exported to the SAP2000 program and after the analysis is made, the results are automatically retrieved and the design calculations is made according to the finite element results of the SAP200 program. In this conditions you can use AS-1170-2007, UBC97, BOCA-96, NBCC-2015, ASCE7-16, IBC2012, NEHRP97,Chinese2010, IS 1893-2016, NZS 1170 2004, Italian NTC 2018, TCVN 9386-2012, KDS 41 17 00-2019, KBC 2016, Dominican Republic R-001 etc. for structural analysis and can use ACI 318-19, AS 3600-2018, BS8110 97, CSA A23.3-04, Eurocode2-2004, Hong Kong CP 2013, Indian IS 456-2000, Italian NTC 2008, KBC 2016,Mexican RCDF 2017, NZS 3101:2006, Singapore CP 65:99, SP63.13330.2012, TS500-2000 etc for concrete frame desing.

Program can optionally export model to SAP2000 and after analysis of SAP2000 and can import analysis results from SAP2000 (Including columns and beams reinforcement) and make design calculations and generate drawings and calculation reports.

StatiCAD is a continuously developed computer program preferred by more than a thousand users in masonry building since 2010.

Soluble Building Systems

StatiCAD-Yigma can solve almost any masonry building that can be solved by Eurocode 6.

Orthogonal –Non Orthogonal building systems (horizontal, vertical, or inclined axis)

Structures with half basement

Stepped Structures

Regulations that can be used in buildings Analysis:

Eurocode 8:Design of structures for earthquake resistance

Eurocode 6:Design of masonry structures

RBTE2013:Principles of Building Risk Identification 2013

DBYBHY2007:Regulations of the Buildings to be Built in Seismic Zone 2007

StatiCAD-Yigma is fully compatible with Regulations for masonry because it’s exclusively developed for masonry buildings.

Usage Area of the Program

Urban Renewal review of existing buildings (Building Regulations and Earthquake Risk Regulation)

Performance Analysis and strengthening of existing masonry buildings

New masonry buildings design

Historic masonry buildings Performance Analysis and strengthening

Reported Outcomes

Pre-Analysis Reports

All of the data input parameters are given in the pre-analysis reports.

Postanalysis Reports

The analysis includes the calculations of the earthquake standards, geometry controls , load analysis , slab analysis , seismic loads calculation , shear center and center of mass calculations ,foundation subsoil stress , shear capacity , bending capacity , vertical stress and shear stress on the walls.

Strengthening Reports

Strengthened Jacket Shear Force , Strengthened Jacket Shear Capacity Controls , Strengthened Composite Wall Sliding Capacity Control

Performance Analysis Report

Calculation of the building performance level and risk situation, calculation of the risky buildings static/geometrical parameters , calculation of Strengthened condition and current situation , Risky building Management or Obtaining Results that Match the Criteria of Earthquake Management The program calculates and reports all of the static parameters required by the regulations of Eurocode 6 and Earthquake Management. There is no extra calculation needed after the program’s calculation.

Drawing Output

Foundation application plan , wall plan , formwork plan , formwork plan sections , vertical bond beam details , foundation details , horizontal bond beam details , individual strengthening jacket details for each wall ( anchors , strengthening mesh , continuance reinforcement). Drawings can be exported in dwg/dxf format with scans, dimensions and layers without any shape loss.

Basic Features of StatiCAD-Yigma

Easy to use and advanced graphics interface.

Overall structure analysis in one step and side by side Project drawnings** witn one touch

Structures with half basement / stepped buildings?? Calculations

Optionally , vertical bond beams can be considered as contributors to the seismic behavior of the building

 strengthened and unstrengthened calculation reports and performance reports can be made with a single Project file.

 strengthened jackets can contribute to the wall compression capacity

 Determine specifid stiffness coeffcient for walls

 Load factors can be changed manually for compressive stress controls and shear stress controls.

 Instead of establishing reinforced concrete analogies , StatiCAD-Yigma uses earthquake regulations.

Precisely determining vertical wall loads with ‘yield line theory‘’ in vertical load analysis.

Compression and shear stress safety controls for the walls.

Different material properties can be entered for each wall , values can be taken automaticly from seismic regulations or, experimental values can be entered.

 strengthening jacket reinforcement calculation strengthening drawing ( steel mesh, jacket drawning and anchor details in the wall section) With an advanced drawn editor like AutoCAD , you can edit the drawings and make them dwg without any loss.

Capable of giving offset value to the elements.

Importing the architectural project drawn in dwg or dxf format and automatically converting architectural lines to axles, walls, beams, foundations, doors, windows, vertical beams.

Ability to import the project in picture format into the drawing editor, pass over it with lines, and automatically convert lines to axles, walls, beams, foundations, doors, windows, vertical beams.

Transferring the project to the SAP2000 Program with all its features and loads, automatic SAP2000 analysis, automatic get of analysis results, creating a design report according to SAP2000 results.

Load transfers between floors independent of axles and nodes.

Even in the finite element model, vertical irregularities can be eliminated with the link elements placed by the program.

Reinforced masonry wall calculations and drawings in line with TBDY2018 calculation principles.

Adding a background image on the modeling screen (showing the scanned project, scaling, scrolling)

Vertical beam design in SAP2000 integrated analysis and verification calculation and report of the existing

Vertical beam application plan and vertical longitudinal expansion drawings

Reinforcement calculations and reports with Fibrous Polymer wrap on walls

Beam reinforcement calculation, opening drawings and reports

Structure-foundation interactive analysis

Foundation reinforcement calculation, opening drawings, reports in building foundation interactive analysis

Reinforced panel wall calculations and reports within the scope of TBDY2018

As element stiffness matrix for frame finite elements

Consider shear+bending in Wall Elements, only bending deformation in other elements

Consider shear+bending deformation in all elements

Consider only bending deformation in all elements

Defining polygon sections by giving corner points with or without gaps, Also parametric and rapid definition of L,T,O,I sections. Section parameters (Xg, Yg, Area, I2, I3, I23) related to defined polygon sections are calculated automatically.

Assigning defined polygon section to columns, beams and foundations

Defining timber, steel, reinforced concrete, concrete, masonry and other materials and their properties for column, wall, beam, foundation elements, choosing from the ready library list

Ability to use the elasticity modules, unit volume weights, moments of inertia, areas, shear strengths and compressive strengths of the defined polygon sections in analysis

and more...

System Requirements

The program works with USB Dongle. Program can be installed in any number of computers and it works when the dongle is plugged in.

 The program runs on 32-byte and 64-byte Windows 7, Windows 8,Windows 10,Windows 11.

 The program requires a USB port for Dongle.